Motherboards button
Serie schede madri
Graphics Card button
Serie Scheda grafica
Monitors button
Monitor Gamer
Mini PC button
Serie Mini PC
Industrial PC button
Serie PC industriali
Server/WS button
Serie server/workstation
Loading

Utilizziamo i cookie per offrirti un'esperienza più personalizzata e fluida. Visitando questo sito web, acconsenti all’utilizzo dei cookie da parte nostra. Se preferisci non accettare i cookie o hai bisogno di maggiori informazioni, consulta la nostra Informativa sulla privacy.

FAQ

  1. Supporto
  2. FAQ
  3. Lista Supporto CPU
  4. Trovare Il Nome Del Modello
  5. Trovare SN
  6. Trovare BIOS
  7. Reparazione / RMA
  8. Contatto Supporto Tecnico
  9. Contatto Problemi Web
Se siete pienamente consapevoli della categoria della vostra domanda, si può scegliere una delle categorie qui sotto per le domande più frequenti. Catalogo:

Risultati:
Q (499): Are there any limitations for M.2 sockets on Intel 500 series motherboards?(5/1/2021)
Q (390): Non riesco a installare Windows 7 e 8 sulla mia NVMe. Cosa devo fare?(3/1/2015)
Q (351): I miei dispositivi eSATA non possono essere rilevati dal controller ASMedia SATA3 su piattaforme Z87. Come posso risolvere questo problema?(9/1/2013)
Q (339): Continuo a ricevere il BSOD quando installi il driver SATA3 ASMedia. Come posso installare il driver SATA3 ASMedia su Windows 8?(2/1/2013)
Q (333): Perché non è possibile il sistema rilevare i miei dischi rigidi quando installo Windows XP?(1/1/2013)
Q (331): Ho costruito un volume RAID 0 e desidero installare un sistema operativo su questo volume RAID. Quanto grande devo impostare la dimensione del settore in modo da poter installare il sistema operativo?(1/1/2013)
Q (326): Voglio usare la funzione TRIM per RAID. Che sistema supporta TRIM per RAID 0?(11/1/2012)
Q (314): Quando imposto SATA come RAID o modalità AHCI, non riesco a vedere i valori S.M.A.R.T con alcune utility come AIAX64 o CrystalDiskInfo, perché?(5/1/2012)
Q (292): Vorrei usare il software WD SmartWare per il backup del sistema, ma quando ASRock Xfast USB è attivato, WD Smartware non funziona. Cosa posso fare?(9/1/2011)
Q (289): Installo Microsoft® Windows® OS in modalità GPT e Ubuntu in modalità MBR con due hard disk differenti e non riesco ad avviare Microsoft® Windows® OS, come posso risolvere questo?(6/1/2011)
Q (279): I would like to install Windows® 7 x64 with GPT format HDD, is there anything I should have done before doing so?(3/14/2011)
Q (273): Perché appare la finestra di dialogo MarvellTray.exe ogni volta che il sistema si avvia in Windows 7 x64?(12/30/2010)
Q (266): I adopt Samsung HD323HJ / HD502HJ / HD503HI / HD103SJ / HD105SI HDD to AMD® SB850 chipset motherboard, but when I start system, the HDD did not spin up. How should I do?(5/6/2010)
Q (265): I have a WD Advanced Format HDD (Western Digital) in my system. The system freezes, Windows® installation cannot find the HDD, or I have low transfer speeds. How can I solve it?(5/6/2010)
Q (248): When I plug in an eSATA HDD, it can be recognized in the BIOS. But in the OS, it will show a massage "Storage Device Connected". And I can not use this eSATA HDD, ether. How can I fix it?
(3/28/2009)
Q (244): When I create a RAID volume over 2TB capacity, the RAID volume cannot be recognized after installing the RAID driver during XP installation. Why?(1/12/2009)
Q (195): I am using the ConRoeXFire-eSATA2/ 775XFire-eSATA2+/ 775XFire-eSATA2/ 775XFire-VSTA/ 775XFire-RAID motherboard. My Operating system was installed in a SATA/ SATA2 HDD with "IDE" mode. When I install the SATA2 driver (Intel® Matrix Storage Manager), system always pops an error message "This computer does not meet the minimum requirements for installing this software". Why?
IDE mode (In BIOS setup):

SATA2 driver:

Error Message:
(2/15/2007)
Q (185): During the POST, there is a number "0075" or "0078" showed at the right corner of the screen, and the system stop for a long time. What can I do?(10/20/2006)
Q (177): I'm using a SATA HDD. My computer was running fine. But one day I turn on my computer, it keeps restarting itself after Windows® Logo page (at startup). Do you have any idea what possibility causes this?(7/21/2006)
Q (145): My SATA HD is WD 800JD. But the HDD cannot be detected by VIA 8237/8237R based motherboards. How do I solve it?(7/15/2005)
Q (141): I would like to use a big capacity Hard Disk on ASRock motherboard. I wonder how large of capacity can ASRock motherboard support at most?(6/23/2005)
Q (131): When I use a Maxtor 250GB hard drive on my ASRock motherboards, the operating system Windows® 2000 or XP only recognizes 128 GB or 137GB. How should I fix this problem?(3/21/2005)
Q (122): My hard drives are Maxtor Diamond MAX 10 and MaxLine III SATA 250 GB and 300 GB with 16 MB cache buffer. My hard drives can not be detected correctly during the POST, what can I do?(1/18/2005)
Q (123): If I use a SATA HDD and an IDE HDD together on P4i65GV, how do I boot from SATA HDD?(1/18/2005)
Q (100): I have an Intel ICH5 chipset based motherboard. I found that my SATA hard drive is not recognized under Linux. What should I do?(6/11/2004)
Q (99): I have installed 1 SATA HDD and 1 IDE HDD (or SCSI card with SCSI HDD) on my P4i48 motherboard, how can I select IDE HDD (or SCSI HDD) in the Boot Device Priority?(6/11/2004)
Q (96): My hard drive is 160 GB, when I install Windows 2000 or Windows XP, I can only see 137 GB. However, when I install this 160 GB hard drive on the ATA 133 RAID card, I can use whole 160 GB. What's wrong?(5/15/2004)
Q (91): I bought a new large size (80GB) HDD. After I installed it to my ASRock M/B, the BIOS only recognized it as a 32GB HDD. How can I get the full capacity of the HDD?(4/15/2004)
Q (77): I want to use the hot plug feature with my SATA HDD. What requirements do I need to know?(12/12/2003)
Q (67): I'm using Intel chipset based motherboard. After installing Win98SE and all drivers, the data transfer rate from IDE devices (HDD or CDROM) seems not fast enough. Is there any thing I can do?(11/14/2003)
Q (1): Why can't I boot up my system with one hard drive on primary IDE and an optical device (CD-ROM, DVD-ROM, CD-RW, etc...) on secondary IDE If connecting the hard drive/optical device as the secondary drive?(10/29/2002)
Q (5): I have a drive that is larger than 137 GB but the operating system only recognizes 128 GB or 137 GB. How can I fix this?(10/29/2002)