If you are fully aware of the category of your question, you may choose one of the categories below for frequently asked questions.
Catalogue: General FAQ
, HDD FAQ
, VGA FAQ
, Audio FAQ
When I use DDR 400 (200 MHz) memory on my board, it shows that the DRAM frequency is running at DDR 333 (166MHz) in BIOS main page. The BIOS option "DRAM Frequency" is set at default setting "Auto". Why?(4/21/2006)
Answer:In order to get the best system compatibility and stability, we make it to run at DDR 333 (166MHz) when DDR 400 (200MHz) memory is installed and BIOS option "DRAM Frequency" is selected to "Auto". If you want to run DDR 400 (200MHz), please kindly adjust the BIOS option "DRAM Frequency" to DDR 400 (200 MHz) manually.
© 2002-2013 ASRock Inc. All rights reserved. | Information published on ASRock.com is subject to change without notice.
The picture of the user interface above is a sample for reference. The actual user interface may vary due to updated software versions.