We use cookies to offer you a more personalized and smoother experience. By visiting this website, you agree to our use of cookies. If you prefer not to accept cookies or require more information, please visit our Privacy Policy.
Als u precies weet waarover w vraag gaat dan kunt u een van deze categorieën kiezen. Categorieën:
Resultaten:
Q (Q&A-173|524):
I cannot control the RGB lighting of the graphics card. What can I do to fix it?(3/1/2023)
A:Please flash the RGB controller firmware of the graphics card via the following procedure.
Step 1. Find and download the correct firmware for your graphics card.
Below steps use the RX 7900 XTX Phantom Gaming 24GB OC (RX7900XTX PG 24GO) as example. File and folder names can be different when using another card.
*Please make sure that the graphics card driver is installed before flashing the RGB firmware. *Exit the RGB software before flashing the RGB firmware (and make sure it is not running in the background).
Step 2. Please extract the RGB firmware tool and copy the path of the folder that contains the RGB firmware.
Step 3. Open Command Prompt as administrator.
Step 4. Type cd and paste the path that you have just copied.
Step 5. Hit the Enter key.
Step 6. Type the word "Update” and press the Tab key on the keyboard. A full command file name will show up.
*The command will be vary based on the graphics card used.
Step 7. Use the Enter key to start flashing the RGB firmware. Give it some time.
Step 8. Once the RGB firmware is updated, the command prompt will show "Update Pass.”
Step 9. Start the ASRock RGB software and check if the graphics card's RGB lighting can be controlled.
Q (Q&A-169|515):
Which graphics cards are supported on my Deskmeet?(7/18/2022)
A:We recommend using a graphic card that consumes up to 200 watt, and supports a discrete Dual slot Graphics card up to 20CM.
The Deskmeet supports CPUs that are up to 65W ("Default TDP” or "Processor Base Power”). The peak power draw of a 65W CPU is about 200W.
The Deskmeet comes with a 500W PSU. So it is able to handle a graphic card with a power draw up to 200W.
For the graphics card's power consumption, please check the specifications provided by the graphic card's vendor.
When checking the power consumption of the graphics card, please refer to the examples below. The power consumption is marked red here:
AMD
NVidia
Intel
Q (Q&A-157|493):
How do I enable IGPU Multi-Monitor on B550/A520 series motherboard?(10/1/2020)
A:To enable IGPU Multi Monitor, please refer to the following path and set the [iGPU Configuration] to [UMA_AUTO].
Advanced\AMD CBS\NBIO Common Options\GFX Configuration
Q (Q&A-145|476):
How do I enable the AMD ReLive function?(3/1/2019)
A:Please refer to the following steps to enable the AMD ReLive function.
Step 1 – Go to ASRock website to download the AMD driver.
Link: https://www.asrock.com/Graphics-Card/index.asp
Step 2 – Select "Install Radeon ReLive” after the driver installation.
Step 3 – Go to the ReLive page and switch ReLive to ON to enable the function.
Step 4 – The ReLive function is enabled.
Q (Q&A-145|475):
I can't install the graphics card driver. How can I solve it?(3/1/2019)
A:1. Please download the latest display driver from the official website.
Link: https://www.asrock.com/Graphics-Card/index.asp
2. Make sure your graphics driver version is compatible with the current Operation System.
3. Right click on "Computer” and select "Manage”.
4. Click "Device Manager” and double click "Display adapters”.
5. Right click on the graphics card and click "Update driver”.
6. Click "Browse my computer for driver software”.
7. Browse for the latest driver downloaded in Step 1.
8. Once the driver is installed successfully, you will see the model name of the card.
Q (Q&A-145|477):
Can I use a DVI to D-sub adaptor for the ASRock RX500 series?(3/1/2019)
A:The RX500 series do not support D-sub outputs, so DVI to D-sub adaptors are not supported.
As for a HDMI/DP to D-sub convertor, the third-party adapter chip will be required, which may occur some problems such as no signal, no system display, etc.
We strongly recommend users using a direct DP, HDMI or DVI connection to the card.
Q (Q&A-145|478):
If there is a new driver available on ASRock website for my graphics card, should I update the driver?(3/1/2019)
A:A new driver may be needed for the following reasons:
1. To support new products or new features
2. To optimize graphics performance or game performance
3. To fix known issues or refine existing features
If your system is working properly, we do not recommend updating the driver.
If you need to update the new driver, you must first uninstall the original driver, restart the computer, and then install the new driver.
Q (Q&A-145|479):
I have installed a graphics card on my system, but monitor doesn't display the signals. What should I do?(3/1/2019)
A:Please refer to the following suggestions to check your system.
1. Unplug the graphics card and see if the system can display from onboard graphics. If not, the problem may be caused by other peripherals instead of the graphics card.
2. Check the cable connections between the graphics card and your monitor.
3. Make sure the PCIe power cable is well connected to the graphics card.
4. Ensure the input signal setting of the monitor is properly configured for the graphics output (DVI, HDMI, DP…).
5. If your motherboard supports more than one PCIe slot, please install the graphics card to other PCIe slot and try again.
Q (Q&A-145|474):
I have intermittent black screen or display loss problems. What should I do?(3/1/2019)
Q (Q&A-117|393):
My monitor and DisplayPort cable supports DP1.2. However, the AMD VGA driver still shows "A display capable of DisplayPort v1.2 data rates and multi-streaming is currently connected to a connector that does not support DisplayPort v1.2" on AMD FM2+ platform. How to fix this issue?(6/1/2015)
Q (Q&A-111|361):
Hoe zet ik de AMD Dual Graphics functie op AMD platformen aan?(3/1/2014)
A:Stap 1:
Zorg ervoor dat u twee geheugenmodules met een frequentie van 1866MHz of hoger in dual channel heeft geplaatst, en dat uw BIOS de nieuwste versie is, waarbij u de standaard UEFI "Dual Graphics" instelling op [Auto] heeft staan.
BIOS download link: https://www.asrock.com/support/download.asp
Stap 2:
Plaats een AMD RADEON PCI Express grafische kaart in de PCI-E sleuf.
Stap 3:
Sluit de monitor kabel aan op de onboard VGA aansluiting. Let er op dat het huidige VGA stuurprogramma / VBIOS alleen Dual Graphics via de onboard videouitgang kan uitvoeren. Voor toekomstige updates kunt u op onze website terecht voor meer informatie.
Stap 4:
Start uw besturingssysteem op.
Verwijder het AMD stuurprogramma als u deze op uw systeem geïnstalleerd heeft staan.
Stap 5:
Installeer het stuurprogramma voor de onboard VGA vanaf de ondersteunings-CD voor zowel de onboard VGA als de aparte grafische kaart.
Stap 6:
Herstart uw computer. Rechtsklik op de desktop. Klik "AMD VISION Engine Control Center" om deze te starten.
Stap 7:
Het is ook mogelijk om "AMD VISION Engine Control Center" op uw Windows taakbalk aan te klikken om deze te starten.
Stap 8:
In het AMD VISION Engine Control Center kiest u "Performance". Klik "AMD CrossFireTM".
Stap 9:
Klik "Enable CrossFire" en klik "Toepassen" om uw aanpassing op te slaan.
Stap 10:
Herstart uw systeem. Hierna kunt u gebruikmaken van de voordelen van de Dual Graphics functie.
Q (Q&A-106|352):
Ik kan het VGA stuurprogramma voor de geïntegreerde graphics van de E3-1265L v3 CPU op de ondersteunings-CD niet installeren. Welk VGA stuurprogramma moet ik installeren voor de E3-1265L v3 CPU?(9/1/2013)
Q (Q&A-103|342):
Wanneer ik Lucid Virtu MVP wil updaten staan er twee soorten Lucid Virtu MVP op de officiële Lucid website: Virtu MVP en Virtu MVP R2.0. Welke versie van Virtu MVP moet ik gebruiken?(3/1/2013)
A:Virtu MVP2.0 is enkel beschikbaar als download en aanschaf voor Lucid online shop klanten.
De Virtu MVP 1e generatie versie is de juiste om mee te updaten. http://www.lucidlogix.com/driverdownloads-mvp.shtml.
Q (Q&A-102|335):
Kan mijn DVI poort audio signalen versturen, net als HDMI? Hoe laat ik dit werken met mijn HDMI monitor?(2/1/2013)
A:Zorgt u er alstublieft voor dat u aan de onderstaande voorwaarden voldoet.
1. De DVI poort op het moederbord moet HDCP ondersteunen.
Als u niet zeker bent over de specificaties van de DVI poort, kunt u deze informatie terugvinden op onze website.
2. Sluit een DVI naar HDMI adapter aan.
3. Wijzig de DVI functie optie naar [as HDMI] in BIOS\Advanced\North Bridge Configuration.
4. Stel HDMI bij Configuratiescherm\Geluid als standaard afspeelapparaat in.
Q (Q&A-102|338):
Na het installeren van VirtuMVP V2.1.221 kan ik mijn printer niet gebruiken, wat is er mis?(2/1/2013)
Q (Q&A-101|332):
Ik krijg een BSOD wanneer ik een aparte grafische kaart in Windows 7 of Windows 8 GPT modus met een Intel 7 serie of AMD FM serie chipset moederbord probeer te installeren, wat moet ik doen?(1/1/2013)
A:Verwijder Virtu MVP van het controle paneel en installeer het stuurprogramma van de grafische kaart.
Nadat het stuurprogramma is geïnstalleerd kunt u Virtu MVP opnieuw installeren.
Q (Q&A-99|327):
Hoe gebruik ik twee beeldschermen in Maximale 3D prestatie modus met een GTX690 videokaart?(11/1/2012)
A:De GTX690 heeft twee GPUs die samenwerken in Maximale 3D prestatie modus.
U moet uw beeldschermen op DVI_2 & DVI_3 aansluiten, die van dezelfde GPU afkomstig zijn.
Q (Q&A-98|324):
Hoe kan ik gebruik maken van 128bit bus-breedte via onboard VGA op Z77, Z68, B75, H67 serie M/B?(10/1/2012)
A:128bit bus-breedte wordt ondersteund met dual-channel geheugen technologie.
Als u gebruik wilt maken van 128bit bus-breedte met de onboard VGA moet u gebruik maken van dual-channel geheugenmodules in uw systeem.
Q (Q&A-96|317):
Mijn systeem herkent de VGA kaart niet en geeft d6 weer op Dr. Debug.(6/1/2012)
A:Aangezien sommige VGA-kaarten incorrecte informatie in hun vBIOS (Video BIOS) hebben staan, kunt u het beste contact opnemen met uw VGA-kaart verkoper, of uw moederbord BIOS naar de nieuwste versie updaten vanaf onze website: https://www.asrock.com/support/download.asp
Als u vragen heeft kunt u contact opnemen met ASRock TSD.
Q (Q&A-88|291):
Wanneer ik een ATI HD6670, HD6570, of HD6450 installeer op een A75/A55 serie moederbord krijg ik geen beeld via de videokaart. Wat kan ik doen?(9/1/2011)
Ook kunt u in het BIOS naar North Bridge Configuration gaan en daar [Dual Graphics] op [Disabled] zetten.
Q (Q&A-86|290):
Ik wil graag mijn 3D Vision driver van NVIDIA updaten van de officiele website, hoe doe ik dat?(6/1/2011)
A:Refereer naar de onderstaande link om naar de Driver sectie van de NVIDIA website te gaan. http://www.nvidia.com/Download/index.aspx
Maak hier de volgende selecties,
Product Type : GeForce
Product Series: GeForce 400 Series
Product: Geforce GT420
Refereer naar onderstaande afbeelding:
Kies hier de door u gewenste taal en klik op zoeken (Search).
Q (Q&A-84|287):
If I play Blu-ray 3D movie and use DTS-HD 7.1 formats to output by PowerDVD 10 on Mini PC 3D series, the sound may be lag. How do I solve this problem?(4/1/2011)
A:Please kindly refer to below steps to download the patch 2721 version and install it for try.
Step 1. Click the icon to upgrade PowerDVD.
Step 2. Click the item "Critical update for PowerDVD!" as below.
Step 3. Click "Download free update now".
Step 4. Download the patch v2721 and install it.
Q (Q&A-84|284):
Why can't I play Blu-ray discs with Core100HT-BD under Windows XP?(4/1/2011)
A:For Intel graphics platforms (including G41, H55, H67 chipsets…etc), Blu-ray playback is only supported on Windows Vista and Windows 7.
Q (Q&A-81|270):
Het afspelen van niet-3D DVDs en Blu-Rays op mijn 3D TV is niet vloeiend. Hoe kan ik dit verhelpen?(12/30/2010)
A:Controleer of uw TV is uitgerust met een functie genaamd "Motion Plus" of een gelijksoortige functie.
Bijvoorbeeld:
1. Op een Samsung 3D TV (UA46C7000WM) is er een "Auto Motion Plus" functie, zet deze optie op "Clear", zoals onderstaande afbeelding.
2. Op een Sony 3D TV is er ook een "Motion Flow" optie, zet deze optie op "Clear".
Q (Q&A-75|256):
Ik heb 2 Nvidia videokaarten op mijn moederbord geplaatst, maar ik kan niet vinden waar ik SLI moet instellen.(9/3/2009)
A:Hieronder volgen enkele suggesties die dit probleem mogelijk zullen oplossen.
1. Als uw moederbord de SLI/XFire switch card heeft, plaatst deze SLI/XFire
Switch card dan in de 8x/8x configuratie, Als er geen switch card aanwezig is kunt u deze stap overslaan.
2. Haal de VGA kaart uit de PCI-E 1 slot.
3. Herstart Windows.
4. Installeer de driver voor de VGA kaart opnieuw
5. Plaats de VGA kaart terug in PCI-E 1 slot, en zet de SLI bridge er op.
6. Activeer de SLI functionaliteit via het Nvidia control panel
Q (Q&A-74|252):
Als ik de HDMI uitgang gebruik dan kan mijn monitor de volledige afmeting niet weergeven, hoe kan ik dit doen?(8/11/2009)
A:
Als uw monitor de knop "PC Mode" heeft klikt u dan hierop. Als dit niet zo is kunt u contact opnemen met uw leverancier.
U kunt ook onderstaand nog uitproberen.
Heeft u een ATI VGA kaart volg dan handleiding A.
Heeft u een Nvidia VGA kaart, volg dan handleiding B.
A. Als u een ATI VGA kaart gebruikt [ATI driver controller] om de [Scaling Option] aan te passen.
1. Rechts klik met de muis op CCC, open hiermee ati CCC (catalist control center).
2. Zoek de [Scaling Option] en verzet de schuif totdat het scherm gevuld word.
B. If you Als u een Nvidia VGA kaart gebruikt zoek dan [Nvidia driver controller] om de [Resize desktop] te vinden.
1. rechtsklik met uw muis op de Nvidia driver en open hem.
2. Zoek de [Resize desktop] optie en verzet deze tot het scherm gevuld is.
Q (Q&A-70|245):
Na het installeren van een ATI 2xxx, 3xxx, 4xxx series PCIE VGA kaart, en na het installeren van alle drivers onder windows XP, blijf ik onder apparaatbeheer een "audio device on the high definition audio bus." Melding zien, wat kan ik doen?(1/12/2009)
A:Dit is de geïntegreerde audiochip van de ATI 2xxx, 3xxx, 4xxxx serie grafische kaarten. Installeert u de ATI HDMI audio driver om dit op te lossen.
http://ati.amd.com/support/drivers/xp/hdmiaudio-xp.html
Q (Q&A-69|242):
When I connect a HDMI_SPDIF cable from the HDMI VGA card (GTX260 or GF9800) to the onboard HDMI_SPDIF header, it cannot get sound from the HDMI output. What should I do?(11/27/2008)
A:The pin definition of the onboard HDMI_SPDIF header is different from the header of some VGA cards.
Please plug in the HDMI_SPDIF cable reversely like following picture.
Q (Q&A-56|205):
I am using the onboard VGA of A780FullDisplayPort or ATi Radeon HD 2xxx/3xxx series PCIE card. Every time I run the 3DMARK or PCMARK, it always freezes during the splash-screen. It does not work at all. How do I fix it?(8/3/2007)
A:This is a compatibility issue of ATi Radeon HD 2xxx/3xxx PCIE card and 3DMARK/ PCMARK program.
Futuremark provides 2 solutions for this issue as follows. Solution 1: Add the command line –nosysteminfo into the target of 3DMARK / PCMARK's shortcut.
Solution 2: Rename the "Direcpll.dll" file to something else. (Found in C:\WINDOWS\system32\Futuremark\MSC\Direcpll.dll)
The link of Futuremark FAQ:
http://service.futuremark.com/support/search.jsp?categoryid=14&search=1
Q (Q&A-53|199):
I'm using Windows® Vista™. I just installed a new VGA card, but the screen gets abnormal display. Is there anything I should do?(4/20/2007)
A:After you install a new hardware device (especially VGA card) under Windows® Vista™, we suggest re-rating your system (refer to the following steps). It may be able to solve the problem.
1.Go to Start > Control Panel > System and Maintenance> Performance Information and Tool
2.You will see the above screen. Press "Refresh Now" to re-rate your system.
Q (Q&A-33|147):
I use PCI Express VGA card on my ASRock motherboard. My operation system is Windows 98SE / ME. In "Device Manager", there are two "Display Adapter Controllers" in "Display Adapters" option. What should I do?(7/15/2005)
A:Please follow the below steps to install PCIE VGA card driver.
a. Please enter "Device Manager" and you will see "Standard Display Adapter (VGA) and "Standard PCI Graphics Adapter (VGA)" in the "Display Adapters" option.
b. Please Choose "Standard Display Adapter (VGA)" and right-click "Remove".
c. After removing the device, please reboot your system. Then, you will only see "Standard Display Adapter (VGA)" in "Display Adapter" option.
d. Please start to install your PCIE VGA card driver.
Q (Q&A-22|110):
My motherboard is SiS chipset based motherboard and the driver of AGP PCI to PCI is version 1.16a or 1.13.03 installed. After updating the Windows XP to service pack 2, there is an exclamation mark in AGP driver of device manager. What should I do?(8/16/2004)
A:If you see an exclamation mark in AGP driver of device manager, please simply reinstall the SiS AGP PCI to PCI driver from ASRock support CD or web site again.
Q (Q&A-11|60):
Can I use on-board VGA and add-on AGP card for dual monitors?(9/15/2003)
A:No, if you would like to use dual monitors please install PCI VGA card with on-board VGA or AGP card with PCI VGA card on the motherboard.
Q (Q&A-11|57):
My ASRock motherboard provides a 1.5V AGP slot. How do I know if I can use my AGP card on the motherboard?(9/15/2003)
A:Generally, the notch of 1.5V AGP slot is different from 3.3V AGP slot. Please refer to the following picture. If your AGP card has the 1.5V key, it is able to work on a 1.5V AGP slot. But few AGP adapters such as SiS305 based cards do not match the rule.
Please check detail AGP SPEC form http://www.ertyu.org/~steven_nikkel/agpcompatibility.html
If you are not sure what your AGP card is 1.5V or 3.3V, please double check with the card vender.
Q (Q&A-4|15):
When I want to install an add-on AGP graphics card, do I need to adjust any settings in the BIOS if my motherboard has Onboard VGA?(1/30/2003)
A:No! You do not need to adjust any settings in the BIOS. ASRock motherboard will switch between add-on AGP and Onboard VGA automatically when you install or uninstall it.