Folosim cookie-uri pentru a vă oferi o experiență mai personalizată și de calitate mai bună. Vizitând acest site web, sunteți de acord cu utilizarea de cookie-uri de către site-ul nostru. Dacă preferați să nu acceptați cookie-uri sau aveți nevoie de mai multe informații, vă rugăm să vizitați Politica noastră de confidențialitate.
Dacă ştii cu exactitate în ce categorie se încadrează întrebările tale poţi alege una dintre categoriile de mai jos pentru întrebările puse frecvent. Catalog:
Rezultate:
Întrebare (Q&A-173|524):
I cannot control the RGB lighting of the graphics card. What can I do to fix it?(3/1/2023)
Răspuns:Please flash the RGB controller firmware of the graphics card via the following procedure.
Step 1. Find and download the correct firmware for your graphics card.
Below steps use the RX 7900 XTX Phantom Gaming 24GB OC (RX7900XTX PG 24GO) as example. File and folder names can be different when using another card.
*Please make sure that the graphics card driver is installed before flashing the RGB firmware. *Exit the RGB software before flashing the RGB firmware (and make sure it is not running in the background).
Step 2. Please extract the RGB firmware tool and copy the path of the folder that contains the RGB firmware.
Step 3. Open Command Prompt as administrator.
Step 4. Type cd and paste the path that you have just copied.
Step 5. Hit the Enter key.
Step 6. Type the word "Update” and press the Tab key on the keyboard. A full command file name will show up.
*The command will be vary based on the graphics card used.
Step 7. Use the Enter key to start flashing the RGB firmware. Give it some time.
Step 8. Once the RGB firmware is updated, the command prompt will show "Update Pass.”
Step 9. Start the ASRock RGB software and check if the graphics card's RGB lighting can be controlled.
Întrebare (Q&A-169|515):
Which graphics cards are supported on my Deskmeet?(7/18/2022)
Răspuns:We recommend using a graphic card that consumes up to 200 watt, and supports a discrete Dual slot Graphics card up to 20CM.
The Deskmeet supports CPUs that are up to 65W ("Default TDP” or "Processor Base Power”). The peak power draw of a 65W CPU is about 200W.
The Deskmeet comes with a 500W PSU. So it is able to handle a graphic card with a power draw up to 200W.
For the graphics card's power consumption, please check the specifications provided by the graphic card's vendor.
When checking the power consumption of the graphics card, please refer to the examples below. The power consumption is marked red here:
AMD
NVidia
Intel
Întrebare (Q&A-157|493):
How do I enable IGPU Multi-Monitor on B550/A520 series motherboard?(10/1/2020)
Răspuns:To enable IGPU Multi Monitor, please refer to the following path and set the [iGPU Configuration] to [UMA_AUTO].
Advanced\AMD CBS\NBIO Common Options\GFX Configuration
Întrebare (Q&A-145|476):
How do I enable the AMD ReLive function?(3/1/2019)
Răspuns:Please refer to the following steps to enable the AMD ReLive function.
Step 1 – Go to ASRock website to download the AMD driver.
Link: https://www.asrock.com/Graphics-Card/index.asp
Step 2 – Select "Install Radeon ReLive” after the driver installation.
Step 3 – Go to the ReLive page and switch ReLive to ON to enable the function.
Step 4 – The ReLive function is enabled.
Întrebare (Q&A-145|475):
I can't install the graphics card driver. How can I solve it?(3/1/2019)
Răspuns:1. Please download the latest display driver from the official website.
Link: https://www.asrock.com/Graphics-Card/index.asp
2. Make sure your graphics driver version is compatible with the current Operation System.
3. Right click on "Computer” and select "Manage”.
4. Click "Device Manager” and double click "Display adapters”.
5. Right click on the graphics card and click "Update driver”.
6. Click "Browse my computer for driver software”.
7. Browse for the latest driver downloaded in Step 1.
8. Once the driver is installed successfully, you will see the model name of the card.
Întrebare (Q&A-145|477):
Can I use a DVI to D-sub adaptor for the ASRock RX500 series?(3/1/2019)
Răspuns:The RX500 series do not support D-sub outputs, so DVI to D-sub adaptors are not supported.
As for a HDMI/DP to D-sub convertor, the third-party adapter chip will be required, which may occur some problems such as no signal, no system display, etc.
We strongly recommend users using a direct DP, HDMI or DVI connection to the card.
Întrebare (Q&A-145|478):
If there is a new driver available on ASRock website for my graphics card, should I update the driver?(3/1/2019)
Răspuns:A new driver may be needed for the following reasons:
1. To support new products or new features
2. To optimize graphics performance or game performance
3. To fix known issues or refine existing features
If your system is working properly, we do not recommend updating the driver.
If you need to update the new driver, you must first uninstall the original driver, restart the computer, and then install the new driver.
Întrebare (Q&A-145|479):
I have installed a graphics card on my system, but monitor doesn't display the signals. What should I do?(3/1/2019)
Răspuns:Please refer to the following suggestions to check your system.
1. Unplug the graphics card and see if the system can display from onboard graphics. If not, the problem may be caused by other peripherals instead of the graphics card.
2. Check the cable connections between the graphics card and your monitor.
3. Make sure the PCIe power cable is well connected to the graphics card.
4. Ensure the input signal setting of the monitor is properly configured for the graphics output (DVI, HDMI, DP…).
5. If your motherboard supports more than one PCIe slot, please install the graphics card to other PCIe slot and try again.
Întrebare (Q&A-145|474):
I have intermittent black screen or display loss problems. What should I do?(3/1/2019)
Întrebare (Q&A-117|393):
Monitorul şi cablul meu DisplayPort suportă DP1.2. Totuşi, driver-ul AMD VGA îmi returnează mesajul "Un ecran compatibil cu DisplayPort v1.2 şi multi-streaming, este legat la un conector care nu are suport pentru DisplayPort v1.2" pe platforma AMD FM2 +. Cum se poate rezolva această problemă?(6/1/2015)
Întrebare (Q&A-111|361):
Cum pot activa functia AMD Dual Graphics pe o platforma AMD?(3/1/2014)
Răspuns:Pasul 1:
Asigurati-va ca BIOS-ul este actualizat la cea mai noua versiune iar setarea implicita UEFI din optiunile "Dual Graphics" este [Auto].
Link descarcare BIOS: https://www.asrock.com/support/download.asp
Pasul 2:
Instalati o placa grafica AMD RADEON PCIE Express in slotul PCIE.
Pasul 3:
Conectati cablul monitorului la portul VGA onboard. Aveti in vedere ca driver-ul VGA actual/VBIOS ofera suport Dual Graphics numai din display-ul onboard.
Pentru actualizari viitoare, consultati site-ul nostru web pentru mai multe informatii.
Pasul 4:
Porniti sistemul de operare.
Dezinstalati driver-ul AMD daca exista unul instalat in sistem.
Pasul 5:
Instalati in sistem driver-ul VGA onboard de pe CD valabil atat pentru placa grafica onboard discreta cat si VGA.
Pasul 6:
Click dreapta pe desktop. Click pe "AMD VISION Engine Control Center" pentru a accesa AMD VISION Engine Control Center.
Pasul 7:
Puteti de asemenea face click pe "AMD VISION Engine Control Center" din Windows taskbar pentru a accesa AMD VISION Engine Control Center.
Pasul 8:
In AMD VISION Engine Control Center, selectati "Performance". Click "AMD CrossFireTM".
Pasul 9:
Click pe "Enable CrossFireTM" dupa care click pe "Apply" pentru a salva modificarile.
Pasul 10:
Restartati sistemul dupa care va puteti bucura de functia Dual Graphics.
Întrebare (Q&A-106|352):
Nu pot instala driver-ul VGA pentru grafica integrată a procesorului E3-1265L v3, aflat pe CD-ul de suport. Ce driver VGA trebuie instalat pentru procesorul E3-1265L v3?(9/1/2013)
Întrebare (Q&A-103|342):
Atunci cand vreau sa actualizez Lucid Virtu MVP, exista doua tipuri de Lucid Virtu MVP pe site-ul web oficial Lucid: Virtu MVP si Virtu MVP R2.0. Ce versiune de Virtu MVP trebuie sa actualizez?(3/1/2013)
Răspuns:Luati in considerare faptul ca Virtu MVP 2.0 este disponibil pentru descarcare si cumparare numai pentru clientii magazinului online Lucid.
Actualizati generatia I de Virtu MVP. http://www.lucidlogix.com/driverdownloads-mvp.shtml.
Întrebare (Q&A-102|335):
Portul DVI poate transfera semnal audio precum cel HDMI? Cum poate funcţiona cu monitorul HDMI?(2/1/2013)
Răspuns:Verificaţi daca îndepliniţi cerinţele menţionate mai jos.
1. Portul DVI de pe placa de bază trebuie să suporte HDCP.
Dacă nu sunteţi sigur de specificaţiile portului DVI, consultaţi lista de specificaţii pentru plăci de bază de pe site-ul nostru web.
2. Conectaţi un adaptor DVI la HDMI.
3. Schimbaţi opţiunea DVI function pe [as HDMI] în BIOS\Advanced\North Bridge Configuration.
4. Setaţi HDMI ca dispozitiv playback implicit în Control Panel\Sound.
Întrebare (Q&A-102|338):
Dupa instalarea utilităţii VirtuMVP V2.1.221 nu pot folosi imprimanta, ce este ȋn neregulă?(2/1/2013)
Întrebare (Q&A-101|332):
Primesc un mesaj de eroare atunci cand instalez un driver pentru placa discreta VGA pe Windows 7 sau Windows 8 GPT cu placi de baza seria FM AMD sau Intel seria 7, ce ar trebui sa fac?(1/1/2013)
Răspuns:Dezinstalati Virtu MVP din control panel apoi instalati driver-ul discret VGA.
Dupa instalarea driver-ului VGA, puteti reinstala Virtu MVP.
Întrebare (Q&A-99|327):
Cum pot utiliza monitoare duale in modul Maximum 3D performance cu o placa VGA GTX690?(11/1/2012)
Răspuns:Placa GTX690 dispune de doua GPU-uri ce lucreaza impreuna in modul Maximum 3D performance.
Trebuie sa conectati monitoarele la iesirile DVI_2 & DVI_3 ce provin de la acelasi GPU.
Întrebare (Q&A-98|324):
Cum pot rula magistrala de 128 bit prin VGA onboard pe plăcile de bază seria Z77, Z68, B75, H67?(10/1/2012)
Răspuns:Magistrala de 128bit este susţinută de tehnologia memoriei dual channel.
Dacă doriţi să obţineţi o magistrală de 128bit cu VGA onboard, integraţi memorii dual channel ȋn sistem.
Întrebare (Q&A-96|317):
Sistemul meu nu a reusit sa identifice placa VGA si afisezeaza d6 pe Dr. Debug.(6/1/2012)
Răspuns:Din moment ce exista cateva placi VGA cu informatii incorecte in vBIOS (Video BIOS), contactati furnizorul placii VGA sau actualizati BIOS-ul placii de baza la cea mai noua versiune de pe site-ul nostru web: https://www.asrock.com/support/download.asp
Întrebare (Q&A-88|291):
Cand instalez ATI HD6670, HD6570, si HD6450 pe seriile de placi de baza A75/A55, nu este afisata imaginea prin conectorul VGA al placii video. Ce pot face?(9/1/2011)
sau intrati in BIOS > North Bridge Configuration, si setati [Dual Graphics] pe pozitia [Disabled].
Întrebare (Q&A-86|290):
I would like to update the VGA driver of Vision 3D from NVIDIA official website, what should I do?(6/1/2011)
Răspuns:Please refer to the link below for Driver Download section on Nvidia website: http://www.nvidia.com/Download/index.aspx
Please made selection as below,
Product Type : GeForce
Product Series: GeForce 400 Series
Product: Geforce GT420
Please refer to picture below:
Select your OS and language, then you could search for the driver.
Întrebare (Q&A-84|287):
If I play Blu-ray 3D movie and use DTS-HD 7.1 formats to output by PowerDVD 10 on Mini PC 3D series, the sound may be lag. How do I solve this problem?(4/1/2011)
Răspuns:Please kindly refer to below steps to download the patch 2721 version and install it for try.
Step 1. Click the icon to upgrade PowerDVD.
Step 2. Click the item "Critical update for PowerDVD!" as below.
Step 3. Click "Download free update now".
Step 4. Download the patch v2721 and install it.
Întrebare (Q&A-84|284):
Why can't I play Blu-ray discs with Core100HT-BD under Windows XP?(4/1/2011)
Răspuns:For Intel graphics platforms (including G41, H55, H67 chipsets…etc), Blu-ray playback is only supported on Windows Vista and Windows 7.
Întrebare (Q&A-81|270):
Imaginea nu este redata clar atunci cand rulez DVD-uri non 3D sau Blu-ray pe televizorul meu 3D. Cum pot remedia aceasta problema?(12/30/2010)
Răspuns:Consultati furnizorul TV cu privire la functia "Motion Plus" sau functii cu setari similare la televizorul 3D.
Exemplu:
1. Pe Samsung 3D TV (UA46C7000WM) exista "Auto Motion Plus", setati aceasta optiune pe "Clear" cum este afisat mai jos.
2. La Sony 3D TV, exista de asemenea optiunea "Motion Flow", setati aceasta optiune pe "Clear".
Întrebare (Q&A-75|256):
I have plug two NVIDIA® VGA cards on my motherboard but, I cannot find the Enable SLI option in NVIDIA® Control panel?(9/3/2009)
Răspuns:Following steps as below may help you to solve this issue.
1. If your motherboard has the SLI/XFire switch card, please put the SLI/XFire Switch card to 8x/8x, if there is no switch card on your motherboard, please skip this step.
2. Remove the graphics card from the PCI-E 1 slot.
3. Restart Windows.
4. Install the driver for the graphics card (again).
5. Put the VGA card back into the PCI-E 1 slot, and put the SLI bridge on.
6. Activate SLI function by NVIDIA® control panel.
7. Or please download the latest VGA driver from NVIDIA® Web Site and try the new driver. http://www.nvidia.com/Download/index.aspx?lang=en-us
Întrebare (Q&A-74|252):
If I use HDMI output, the desktop size can not fully fit the monitor.
How can I do?(8/11/2009)
Răspuns:
If your monitor has "PC mode", please try to adjust monitor to PC mode. If not, please contact your monitor vender for help.
Or you can do some setting on driver.
ATI VGA output, please refer setting A.
NVIDIA® VGA output, please refer setting B.
A. If you use ATI VGA output, please enter [ATI driver controller] to adjust [Scaling Option]
1. Right check the mouse, and enter ATI driver controller.
2. Find the [Scaling Option] to setting the bar until to fit the size.
B. If you use NVIDIA® VGA output, please enter [NVIDIA® driver controller] to adjust [Resize desktop]
1. Right check the mouse, and enter NVIDIA® driver controller.
2. Find the [Resize desktop] option to setting the bar until to fit the size.
Întrebare (Q&A-70|245):
I install ATI 2xxx, 3xxx, 4xxx series PCIE VGA card on the motherboard. After installing all Windows® XP drivers from the motherboard, it still shows an unknown "audio device on the high definition audio bus." message under device manager. What could I try?(1/12/2009)
Răspuns:There is an integrated audio chip in the ATI 2xxx, 3xxx, 4xxxx series graphics cards.
Please install ATI HDMI audio driver.
http://ati.amd.com/support/drivers/xp/hdmiaudio-xp.html
Întrebare (Q&A-69|242):
When I connect a HDMI_SPDIF cable from the HDMI VGA card (GTX260 or GF9800) to the onboard HDMI_SPDIF header, it cannot get sound from the HDMI output. What should I do?(11/27/2008)
Răspuns:The pin definition of the onboard HDMI_SPDIF header is different from the header of some VGA cards.
Please plug in the HDMI_SPDIF cable reversely like following picture.
Întrebare (Q&A-56|205):
I am using the onboard VGA of A780FullDisplayPort or ATi Radeon HD 2xxx/3xxx series PCIE card. Every time I run the 3DMARK or PCMARK, it always freezes during the splash-screen. It does not work at all. How do I fix it?(8/3/2007)
Răspuns:This is a compatibility issue of ATi Radeon HD 2xxx/3xxx PCIE card and 3DMARK/ PCMARK program.
Futuremark provides 2 solutions for this issue as follows. Solution 1: Add the command line –nosysteminfo into the target of 3DMARK / PCMARK's shortcut. Solution 2: Rename the "Direcpll.dll" file to something else. (Found in C:\WINDOWS\system32\Futuremark\MSC\Direcpll.dll)
The link of Futuremark FAQ:
http://service.futuremark.com/support/search.jsp?categoryid=14&search=1
Întrebare (Q&A-53|199):
I'm using Windows® Vista™. I just installed a new VGA card, but the screen gets abnormal display. Is there anything I should do?(4/20/2007)
Răspuns:After you install a new hardware device (especially VGA card) under Windows® Vista™, we suggest re-rating your system (refer to the following steps). It may be able to solve the problem.
1.Go to Start > Control Panel > System and Maintenance> Performance Information and Tool
2.You will see the above screen. Press "Refresh Now" to re-rate your system.
Întrebare (Q&A-33|147):
I use PCI Express VGA card on my ASRock motherboard. My operation system is Windows 98SE / ME. In "Device Manager", there are two "Display Adapter Controllers" in "Display Adapters" option. What should I do?(7/15/2005)
Răspuns:Please follow the below steps to install PCIE VGA card driver.
a. Please enter "Device Manager" and you will see "Standard Display Adapter (VGA) and "Standard PCI Graphics Adapter (VGA)" in the "Display Adapters" option.
b. Please Choose "Standard Display Adapter (VGA)" and right-click "Remove".
c. After removing the device, please reboot your system. Then, you will only see "Standard Display Adapter (VGA)" in "Display Adapter" option.
d. Please start to install your PCIE VGA card driver.
Întrebare (Q&A-22|110):
My motherboard is SiS chipset based motherboard and the driver of AGP PCI to PCI is version 1.16a or 1.13.03 installed. After updating the Windows XP to service pack 2, there is an exclamation mark in AGP driver of device manager. What should I do?(8/16/2004)
Răspuns:If you see an exclamation mark in AGP driver of device manager, please simply reinstall the SiS AGP PCI to PCI driver from ASRock support CD or web site again.
Întrebare (Q&A-11|60):
Can I use on-board VGA and add-on AGP card for dual monitors?(9/15/2003)
Răspuns:No, if you would like to use dual monitors please install PCI VGA card with on-board VGA or AGP card with PCI VGA card on the motherboard.
Întrebare (Q&A-11|57):
My ASRock motherboard provides a 1.5V AGP slot. How do I know if I can use my AGP card on the motherboard?(9/15/2003)
Răspuns:Generally, the notch of 1.5V AGP slot is different from 3.3V AGP slot. Please refer to the following picture. If your AGP card has the 1.5V key, it is able to work on a 1.5V AGP slot. But few AGP adapters such as SiS305 based cards do not match the rule.
Please check detail AGP SPEC form http://www.ertyu.org/~steven_nikkel/agpcompatibility.html
If you are not sure what your AGP card is 1.5V or 3.3V, please double check with the card vender.
Întrebare (Q&A-4|15):
When I want to install an add-on AGP graphics card, do I need to adjust any settings in the BIOS if my motherboard has Onboard VGA?(1/30/2003)
Răspuns:No! You do not need to adjust any settings in the BIOS. ASRock motherboard will switch between add-on AGP and Onboard VGA automatically when you install or uninstall it.
Meniul
