If you are fully aware of the category of your question, you may choose one of the categories below for frequently asked questions.
Catalogue: General FAQ
, HDD FAQ
, VGA FAQ
, Audio FAQ
What is Dr. Debug and how do I troubleshoot with these codes?(2/1/2013)
After I selected EZ OC to higher frequency option in ION330. There will be no post image or get black screen. How can I do?(8/11/2009)
My motherboards are K7VT4A+ and K7VM3. During the POST, it shows "Mac address are invalid in both CMOS and DMI. Press F1 to resume”. What should I do?(12/15/2004)
My on-board LAN is not working, I found that the MAC address of my on-board LAN is 00-00-00-00-00-00 or FF-FF-FF-FF-FF-FF. What's wrong?(4/15/2004)
My motherboard is Intel or ALi south bridge based motherboard. When I connect the ATX power connector to the motherboard, the system power on right away. Why?(3/15/2004)
How to clear CMOS? (6/13/2003)
Should I clear the CMOS after I upgrade the BIOS?(1/30/2003)
What's the meaning of AMI BIOS Beep Codes?(10/29/2002)
© 2002-2014 ASRock Inc. All rights reserved. | Information published on ASRock.com is subject to change without notice.
The picture of the user interface above is a sample for reference. The actual user interface may vary due to updated software versions.