ASRock
Home | Global / English [Change]
ASRock channel on YouTube
Follow ASRock on facebook now!
ASRock Forum
X99 Taichi
Fatal1ty X99 Professional Gaming i7
Deskmini 110
Intel Broadwell-E
Intel Hyper
E3V5
Content Creation
Intel 100
Beebox
G10
Fatal1ty
Gaming
close

FAQ

If you are fully aware of the category of your question, you may choose one of the categories below for frequently asked questions.
Catalogue: General FAQ, HDD FAQ, VGA FAQ, Audio FAQ.
Keyword:
Question (Q&A-102|334): What is Dr. Debug and how do I troubleshoot with these codes?(2/1/2013)
Answer:Dr. Debug is used to provide codes that represent different errors that your system has encountered. Please see the diagram below for reading the Dr. Debug codes and how to troubleshoot.
CodeDescription
00Please check if the CPU is installed correctly and then clear CMOS.
0dProblem related to memory, VGA card or other devices. Please clear CMOS, re-install the memory and VGA card, and remove other USB, PCI devices.
01 - 54 (except 0d), 5A- 60Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the problem still exists, please install only one memory module or try using other memory modules.
55The Memory could not be detected. Please re-install the memory and CPU. If the problem still exists, please install only one memory module or try using other memory modules.
61 - 91Chipset initialization error. Please press reset or clear CMOS.
92 - 99Problem related to PCI-E devices. Please re-install PCI-E devices or try installing them in other slots. If the problem still exists, please remove all PCI-E devices or try using another VGA card.
A0 - A7Problem related to IDE or SATA devices. Please re-install IDE and SATA devices. If the problem still exists, please clear CMOS and try removing all SATA devices.
b0Problem related to memory. Please re-install the CPU and memory. If the problem still exists, please install only one memory module or try using other memory modules.
* For X79 models, please try installing memory to DDR3 A1, B1, C1 and D1 slots.
b4Problem related to USB devices. Please try removing all USB devices.
b7Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the problem still exists, please install only one memory module or try using other memory modules.
d6The VGA could not be recognized. Please clear CMOS and try re-installing the VGA card. If the problem still exists, please try installing the VGA card in other slots or use other VGA cards.
d7The Keyboard and mouse could not be recognized. Please try re-installing the keyboard and mouse.
d8Invalid Password.
FFPlease check if the CPU is installed correctly and then clear CMOS.
© 2002-2016 ASRock Inc. All rights reserved. | Information published on ASRock.com is subject to change without notice.
The picture of the user interface above is a sample for reference. The actual user interface may vary due to updated software versions.