We use cookies to offer you a more personalized and smoother experience. By visiting this website, you agree to our use of cookies. If you prefer not to accept cookies or require more information, please visit our Privacy Policy.
Si votre questions porte sur un domaine particulier, vous pouvez choisir directement une catégorie ci-contre pour les réponses aux questions les plus fréquentes:
Résultats:
Question (Q&A-174|529):
What should I do if I use a LAN port to transfer a large file and the connection is disconnected after a few seconds?(4/26/2023)
Answer:Please follow below instructions to solve this problem.
1. Launch the "Device Manager” and find your "Network Adapter”.
2. Right click your network adapter and select "Properties”.
3. Select the tab "Advanced”.
4. Set "Large Send Offload v2 (IPv4)” to [Disabled]
5. Set "Large Send Offload v2 (IPv6)” to [Disabled]
Question (Q&A-173|526):
I connect the system to the network via the 2.5 Gbps E3100G Ethernet port, but the network keeps disconnecting and auto-reconnecting from time to time. What should I do?(3/1/2023)
If the latest driver does not fix the problem, please follow below steps to adjust settings manually.
1. Right-click the "Windows Start icon” and choose the [Device manager].
2. Find the "Network adapters”, right-click the [Killer E3100G 2.5 Gigabit Ethernet Controller] and open the properties.
3. Go to the "Advanced” tab and set "Advanced EEE” to [Disabled].
4. Set "Energy-Efficient Ethernet” to [Disabled].
5. Set "Green Ethernet” to [Disabled].
6. Set "Power Saving Mode” to [Disabled].
7. Fix "Speed & Duplex” at 2.5Gbps Full Duplex.
#Ethernet #2.5G #E3100G #disconnecting #LAN
Question (Q&A-171|521):
How do I install Windows 11 without the Internet?(9/28/2022)
Answer:If you encounter the following screen while installing Windows 11, please follow the steps below to proceed install Windows 11 without the Internet.
Step 1: Press shift + F10 key to open command prompt → Type oobe\bypassnro → Hit Enter key to set up Windows 11 without an Internet connection.
Step 2: After step 1, the system will restart once.
Step 3: After restart, proceed on settings up Windows 11 until you see the following screen. Then click I don't have internet.
Step 4: Click Continue with limited setup to create an local account.
Question (Q&A-168|514):
Which CNVi WiFi modules are compatible with my motherboard?(4/1/2022)
Answer:First please determine which type of WiFi/Bluetooth(BT) module you can use on your motherboard. Second, if you want to use CNVi, you will need to check which generation of CNVi your motherboard supports.
Which type of WiFi/BT module is supported on your motherboard?
In general, there are 2 types of WiFi/BT modules that can be used via a Key E M.2 socket.
One type uses a regular PCIe connection (for WiFi) and USB connection (for Bluetooth) via the M.2 socket.
The other type uses CNVi, which is available on specific Intel platforms only: https://www.intel.in/content/www/in/en/support/articles/000026155/wireless.html
On the Asrock website, please check the specifications of your motherboard to determine which type is supported on your motherboard. Here are some examples.
If you would like to use CNVi, please note that there are different generations of CNVi. The table below shows which chipset supports which CVNi generation.
Intel Chipset
Supported CNVi System Interface Type
Intel 300 series
M.2: CNVio
Intel 400 series
M.2: CNVio and CNVio2* *CNVio2 support only for Model Intel AX101, AX201, AX203.
Intel 500 series
Intel 600 series
M.2: CNVio and CNVio2
Checking the specifications of WiFi/BT modules
To check the "System Interface Type” of your WiFi module, please visit Intel® ARK for further information.
Question (Q&A-148|483):
Comment paramétrer la fonction de Teaming avec un adaptateur Ethernet Intel sous Windows 10 1809 ou une version ultérieure ?(10/1/2019)
Answer:Veuillez suivre la procédure ci-dessous pour paramétrer la fonction de Teaming avec un adaptateur Ethernet Intel sous Windows 10 :
Étape 1: Accédez au gestionnaire de périphériques en recherchant « gestionnaire de périphériques » dans la barre de recherche.
Ouvrez la rubrique « Cartes réseau » puis effectuez un clic droit sur le périphérique Ethernet Intel pour le désinstaller.
Après la désinstallation du périphérique Ethernet, veuillez redémarrer le système après l'avoir complètement éteint.
Step2: Download the latest driver (later than v23.5) from Intel or ASRock official website for your Intel® Ethernet Adapter.
Step3: Search "CMD” at search bar and run Command Prompt as administrator.
Décompressez le pilote et accédez à l'adresse APPS > PROSETDX > Winx64. Copiez l'adresse racine.
Dans l'invite de commandes, veuillez changer l'adresse racine pour le dossier APPS > PROSETDX > Winx64 avec la commande ci-dessous :
CD C:\Users\1\Desktop\24_2\APPS\PROSETDX\Winx64.
Étape 4: Installez le pilote en exécutant la commande ci-dessous :
DxSetup.exe BD=1 PROSET=1 ANS=1
Après l'installation du pilote, veuillez redémarrer le système.
Étape 5: Recherchez « Powershell » via la barre de recherche et lancez Powershell en mode administrateur.
Exécutez la commande ci-dessous :
Import-Module –Name "C:\Program Files\Intel\Wired Networking\IntelNetCmdlets\IntelNetCmdlets.dll"
Aucune confirmation n'est affichée. Exécutez ensuite la commande suivante :
New-IntelNetTeam
Étape 6: Le système vous demande le nom des membres de la Team. Veuillez vous rendre dans le gestionnaire de périphériques puis dans la rubrique « cartes réseau » pour confirmer le nom des adaptateurs Ethernet.
Étape 9: Si tout s'est bien déroulé, vous devriez pouvoir voir le nom de votre Team devant les adaptateurs Ethernet dans le gestionnaire de périphériques.
* Si vous souhaitez désinstaller la Team, veuillez exécuter la commande ci-dessous dans l'utilitaire Powershell :
Remove-IntelNetTeam
Le système vous demande le nom de la Team, veuillez saisir le nom et la Team sera désinstallée.
Question (Q&A-143|471):
Comment activer le WiFi avec une carte AC 8260 sur une carte mère H370 Performance ?(1/1/2019)
Answer:Pour activer le WiFi AC 8260, veuillez configurer le BIOS selon les indications ci-dessous :
Régler M2_3/PCIE_3 Switch sur Force_M.2 dans la section Advanced\Chipset Configuration
Après avoir effectué le réglage ci-dessus, veuillez presser la touche "F10” pour sauvegarder les changements.
Question (Q&A-139|463):
Comment activer la fonction Wake on LAN en mode S5 sous Windows 10 ?(3/1/2018)
Answer:Veuillez suivre les indications ci-dessous :
Étape 1 : Décochez l'option de démarrage rapide dans le panneau de contrôle.
Étape 2 : Décompressez le fichier EnableWOLInFastStartup et éxécutez le fichier WakeOnFastStartup.bat en mode administrateur via un clic droit pour procéder à l'installation.
Link: https://download.asrock.com/TSD/EnableWOLInFastStartup.zip
Étape 3 : Cochez la fonction démarrage rapide dans le panneau de contrôle.
La fonction Wake on LAN est maintenant activée en mode S5.
Question (Q&A-130|438):
Sur la plateforme Beebox Series, pourquoi le symbole "!” s'affiche dans le gestionnaire de périphériques lors de l'installation du pilote Realtek Wireless LAN sous Windows 10 RS1 ?(4/1/2017)
Answer:Si vous installez le pilote Realtek sous Windows 10 RS1, le symbole « ! » est susceptible d'apparaître dans le gestionnaire de périphériques. Veuillez vous reporter au lien ci-dessous pour télécharger le pilote Realtek ver:2023.48.0801.2016 pour Windows 10 RS1 ou utilisez le pilote installé par défaut.
Lien de téléchargement : https://www.asrock.com/nettop/overview.asp?Model=Beebox%20Series&cat=Download&os=Win1064