If you are fully aware of the category of your question, you may choose one of the categories below for frequently asked questions.
I use 775VM800/P4VM800/K7S41GX/K7S41 motherboards. Do these models support 1440x900 resolution?(7/21/2006)
Answer:If your board is 775VM800, please update BIOS to P1.50 or later version.
If your board is P4VM800, please update BIOS to P1.60 or later version.
If your board is K7S41GX, Please update BIOS to P2.50 or later and VGA driver to 3.73 or later version.
If your board is K7S41, Please update BIOS to P2.30 or later and VGA driver to 3.73 or later version.
VGA Driver for K7S41 / K7S41GX: http://www.sis.com/download/agreement.php?id=155931
I am using Geode NX CPU on ASRock K7S41 / K7S41GX / K7VT4A Pro / K7VT6-C / K7Upgrade-600 series motherboard.
How do I set FSB jumper for my CPU?(4/21/2006)
Answer:The FSB of Geode NX CPU (1750,1500) is 266MHz. Please remember to adjust the FSB_SEL jumper to FSB 266MHz while using a NX CPU.
If I use only one 128MB memory on the ASRock board with integrated VGA (ex. K7VM3, K7S41/GX, etc...), what share memory size should I choose?(1/18/2005)
Answer:Since the share memory uses the system memory, for better system performance, we recommend you to set share memory size to 32MB or less in the BIOS setting. (For Intel chipset based motherboards, please refer to TSD-QA-08 (June, 13th, 2003) https://www.asrock.com/support/QA/TSDQA-08.pdf)
My motherboard is K7S41(GX), what should I set in the BIOS setup to use the on-board VGA with a PCI VGA card for dual monitors function?(10/15/2004)
Answer:To use on-board VGA with a PCI VGA card for dual monitors function, please enter the "Advanced" -> "Chipset Configuration" -> "Onboard Share memory" and adjust "Auto" to any other values (32MB, 64 MB, or 128 MB) in the BIOS setup.
My motherboard is K7S41 or K7S41GX, my Hauppauge Win TV card can not work with it. What should I do?(4/15/2004)
Answer:Please try latest Hauppauge's patch driver from Hauppauge's web site.