ASRock
Home | Global / English [Change]
ASRock channel on YouTube
Follow ASRock on facebook noew!
ASRock Forum
9 Series OC Competition
Intel X99 Series
Intel 9 Series
Bitcoin Boss Club
M8
Cloud
Fatal1ty Killer
FM2+
Fatal1ty
Gaming

FAQ

If you are fully aware of the category of your question, you may choose one of the categories below for frequently asked questions.
Catalogue: General FAQ, HDD FAQ, VGA FAQ, Audio FAQ.
Keyword:
Question (Q&A-14|73): I have an ASRock ATX motherboard. Do I need to screw on the double hole?(12/12/2003)
Answer:ASRock ATX motherboards are ATX specification 1.1 and 2.0 compliant, so the screw hole, which is on the right bottom of board, will be double holes design. According to the ATX specification, it is not necessary to screw this hole, you can please just use a plastic stand to bear this hole. If you still want to screw this hole, please do not over-tighten the screw, doing so may damage the board.

© 2002-2014 ASRock Inc. All rights reserved. | Information published on ASRock.com is subject to change without notice.
The picture of the user interface above is a sample for reference. The actual user interface may vary due to updated software versions.