FAQ

If you are fully aware of the category of your question, you may choose one of the categories below for frequently asked questions.

Results:
Question (Q&A-89|297): How do I setup digital sound (DTS5.1, Dolby5.1, DTS HD Master and Dolby True HD) output via HDMI or SPDIF?(11/1/2011)
Answer:Requirements:
OS: Windows7, Vista SP2 or later.
Receiver / decoder: Onkyo TX-SR608 amplifier for example:
Playback software: for example Power DVD10 v10.0.2025.52 or other playback software.

Setup:
1. Please install all drivers from support CD, after that please check device manager, there should be no any "!" or "?" on list.

2. Please enter Control Panel > Hardware and Sound > Sound,
If you would like to output via HDMI, please select [HDMI output]
If you would like to output via SPDI, please select [Digital output]

*Different motherboard/chipset may show different information, above picture is for references only.

3. Enter the Audio settings in your application.
We take Power DVD 10 here for example: Choose the Speaker environment and Output modes as you want.


4. Set your decoder/amplifier to the digital sound output, which you want.

5. Set the correct output format on your content /source manual.


6. Then you can play the content/source.