If you are fully aware of the category of your question, you may choose one of the categories below for frequently asked questions.
Catalogue: General FAQ
, HDD FAQ
, VGA FAQ
, Audio FAQ
How do I get my onboard LAN to work properly?(4/28/2008)
Answer:Here are some suggestions:
1.Make sure the "Onboard LAN" option was enabled in BIOS.
2.Make sure the LAN driver was installed properly. Please check it in "Device Manager".
3.Update the BIOS of your motherboard to the latest one.
4.Try the newer LAN driver from ASRock or chipset vendor's website.
5.Change another LAN cable. (For Gigabit LAN, please make sure your LAN cable could fully work with Gigabit LAN.)
6.Reinstall the operating system.
© 2002-2014 ASRock Inc. All rights reserved. | Information published on ASRock.com is subject to change without notice.
The picture of the user interface above is a sample for reference. The actual user interface may vary due to updated software versions.