If you are fully aware of the category of your question, you may choose one of the categories below for frequently asked questions.
Catalogue: General FAQ
, HDD FAQ
, VGA FAQ
, Audio FAQ
I am using the AMD®
AM2 rev.G CPU. But the system always stops at POST after I turn on the system. I can't go into the operating system. What should I do?(12/19/2006)
:For supporting AMD®
AM2 rev.G CPU, please follow the steps to update the BIOS of your motherboard to the latest one.
1.Please press the "F2" key continuously right after turn on the system until it goes into the BIOS setup.
2.Please disable the "Cool'n'Quiet" function in BIOS setup.
3.Press "F10" key to save configuration changes and exit setup.
4.You can start to update the BIOS now.
How to update BIOS?
BIOS download page.
© 2002-2013 ASRock Inc. All rights reserved. | Information published on ASRock.com is subject to change without notice.
The picture of the user interface above is a sample for reference. The actual user interface may vary due to updated software versions.