Question (Q&A-95):How to install OS on over 2.2TB RAID volume on ASRock 970/990FX motherboard? (2012/5/1 星期二)
Answer:Please follow below SOP to install Windows Vista/7 64bit OS on the RAID volume: Step 1: Flash BIOS to latest version. Step 2: Connect all HDDs then do below settings: Set [SATA Mode] as [RAID Mode] Change [Onboard RAID 3TB+ Unlocker] to [EFI Compatible ROM] The options are located in BIOS > [Advanced] > [Storage Configuration] Then press F10 to save settings. Step 3: Press F11 during boot up and choose boot to [Built-in EFI Shell]. Step 4: Key in "drvcfg”, and you will see the information like below: Drv[4E] Ctrl[B5] Lang[eng]
Step 5: Key in "dh [Drv number]”, for example: key in "dh 4E”.
Step 6: Key in "drvcfg –s [Drv number] [Ctrl number]” to enter Raid Utility. For example: key in "drvcfg –s 4E B5”
Step 7: Choose [Logical Drive Main Menu] to set up Raid Drive.
Step 8: Choose [Logical Drive Create Menu] to create a Raid Drive.
Step 10: Press Space on keyboard to toggle checkbox.
Step11: Choose [Ld Size setting], and key in the Raid size.
Step12: After set up Raid size, please click [Start to Create]
Step13: Press "F10” to Exit Utility. Step14: During reboot, please press "F11” to enter Boot Menu. Choose UEFI: CD/DVD Drive
* This option only shows on Windows7 64bit and Vista 64bit OS. Step 15: Follow Windows Installation Guide to install OS. Please load latest SATA RAID driver ver.3.3.1540.22 during OS installation from our website Step 16: Install latest drivers from ASRock website.