Utilizziamo i cookie per offrirti un'esperienza più personalizzata e fluida. Visitando questo sito web, acconsenti all’utilizzo dei cookie da parte nostra. Se preferisci non accettare i cookie o hai bisogno di maggiori informazioni, consulta la nostra Informativa sulla privacy.
Se siete pienamente consapevoli della categoria della vostra domanda, si può scegliere una delle categorie qui sotto per le domande più frequenti. Catalogo:
Risultati:
Q (524):
I cannot control the RGB lighting of the graphics card. What can I do to fix it?(3/1/2023)
A:Please flash the RGB controller firmware of the graphics card via the following procedure.
Step 1. Find and download the correct firmware for your graphics card.
Below steps use the RX 7900 XTX Phantom Gaming 24GB OC (RX7900XTX PG 24GO) as example. File and folder names can be different when using another card.
*Please make sure that the graphics card driver is installed before flashing the RGB firmware. *Exit the RGB software before flashing the RGB firmware (and make sure it is not running in the background).
Step 2. Please extract the RGB firmware tool and copy the path of the folder that contains the RGB firmware.
Step 3. Open Command Prompt as administrator.
Step 4. Type cd and paste the path that you have just copied.
Step 5. Hit the Enter key.
Step 6. Type the word "Update” and press the Tab key on the keyboard. A full command file name will show up.
*The command will be vary based on the graphics card used.
Step 7. Use the Enter key to start flashing the RGB firmware. Give it some time.
Step 8. Once the RGB firmware is updated, the command prompt will show "Update Pass.”
Step 9. Start the ASRock RGB software and check if the graphics card's RGB lighting can be controlled.
Q (515):
Which graphics cards are supported on my Deskmeet?(7/18/2022)
A:We recommend using a graphic card that consumes up to 200 watt, and supports a discrete Dual slot Graphics card up to 20CM.
The Deskmeet supports CPUs that are up to 65W ("Default TDP” or "Processor Base Power”). The peak power draw of a 65W CPU is about 200W.
The Deskmeet comes with a 500W PSU. So it is able to handle a graphic card with a power draw up to 200W.
For the graphics card's power consumption, please check the specifications provided by the graphic card's vendor.
When checking the power consumption of the graphics card, please refer to the examples below. The power consumption is marked red here:
AMD
NVidia
Intel
Q (493):
How do I enable IGPU Multi-Monitor on B550/A520 series motherboard?(10/1/2020)
A:To enable IGPU Multi Monitor, please refer to the following path and set the [iGPU Configuration] to [UMA_AUTO].
Advanced\AMD CBS\NBIO Common Options\GFX Configuration
Q (476):
Come faccio ad abilitare la funzione AMD ReLive?(3/1/2019)
A:Fare riferimento ai seguenti passaggi per abilitare la funzione AMD ReLive.
Step 1 – Accedere al sito Web ASRock per scaricare il driver AMD.
Link: https://www.asrock.com/Graphics-Card/index.asp
Step 2 – Selezionare "Installa Radeon ReLive” dopo l'installazione del driver.
Step 3 – Vai alla pagina ReLive e imposta ReLive su ON per abilitare la funzione.
Step 4 – La funzione ReLive è abilitata.
Q (475):
Non riesco a installare il driver della scheda grafica. Come posso risolverlo?(3/1/2019)
A:1. Scarica il driver più recente dal sito Web ufficiale.
Link: https://www.asrock.com/Graphics-Card/index.asp
2. Assicurarsi che la versione del driver della scheda grafica sia compatibile con il sistema operativo attuale.
3. Fare clic con il tasto destro su "Computer” e selezionare "Gestisci”.
4. Fare clic su "Gestione periferiche” e doppio clic su "Visualizza adattatori”.
5. Fare clic con il tasto destro sulla scheda grafica e fare clic su "Aggiorna driver”.
6. Fare clic su "Cerca il software del driver nel mio computer”.
7. Cercare il driver più recente scaricato nel passaggio 1.
8. Una volta installato correttamente il driver, verrà visualizzato il nome del modello della scheda.
Q (477):
Posso usare un adattatore DVI-D-sub per la serie ASRock RX500?(3/1/2019)
A:La serie RX500 non supporta le uscite D-sub, di conseguenza gli adattatori DVI-D-sub non sono supportati.
Per quanto riguarda il convertitore da HDMI/DP a D-sub, sarà necessario un chip adattatore di terze parti, che potrebbe causare alcuni problemi quali assenza di segnale, nessuna visualizzazione del sistema, ecc.
Consigliamo vivamente agli utenti di utilizzare una connessione diretta DP, HDMI o DVI alla scheda.
Q (478):
Se è disponibile un nuovo driver sul sito Web ASRock per la mia scheda grafica, devo aggiornare il driver?(3/1/2019)
A:Potrebbe essere necessario un nuovo driver per i seguenti motivi:
1. Per supportare nuovi prodotti o nuove funzionalità
2. Per ottimizzare le prestazioni grafiche o le prestazioni del gioco
3. Per risolvere problemi noti o perfezionare le funzionalità esistenti
Se il sistema funziona correttamente, non è consigliabile aggiornare il driver.
Se è necessario aggiornare il nuovo driver, è necessario prima disinstallare il driver originale, riavviare il computer e quindi installare il nuovo driver.
Q (479):
Ho installato una scheda grafica sul mio sistema, ma il monitor non mostra i segnali. Cosa devo fare?(3/1/2019)
A:Fare riferimento ai seguenti suggerimenti per verificare il sistema.
1. Scollegare la scheda grafica e vedere se il sistema riesce a visualizzare dalla grafica integrata.
In caso contrario, il problema potrebbe essere causato da altre periferiche anziché dalla scheda grafica.
2. Controllare i collegamenti del cavo tra la scheda grafica e il monitor.
3. Assicurarsi che il cavo di alimentazione PCIe sia ben collegato alla scheda grafica.
4. Verificare che l'impostazione del segnale di ingresso del monitor sia configurata correttamente per l'uscita grafica (DVI, HDMI, DP...).
5. Se la scheda madre supporta più di uno slot PCIe, installare la scheda grafica su un altro slot PCIe e riprovare.
Q (474):
Ho uno schermo nero intermittente o problemi di perdita del display. Cosa devo fare?(3/1/2019)
Q (393):
Il mio monitor e il cavo DisplayPort supportano DP1.2. Tuttavia, il driver AMD VGA mostra ancora "Un display con velocità di trasmissione dati per DisplayPort v1.2 e multi-streaming è attualmente collegato ad un connettore che non supporta DisplayPort v1.2" sulla piattaforma AMD FM2+. Come posso risolvere questo problema?(6/1/2015)
Q (361):
Come attivare la funzionalità AMD Dual Graphics su una piattaforma AMD?(3/1/2014)
A:Fase 1:
Assicurati che il tuo BIOS sia aggiornato all'ultima versione e mantieni l'impostazione UEFI predefinita dell'opzione "Dual Graphics" su [Auto].
Link per scaricare il BIOS: https://www.asrock.com/support/download.asp
Fase 2:
Install one AMD RADEON PCI Express graphics card to PCIE slot.
Fase 3:
Collegare il cavo del monitor alla porta VGA integrata. Ti preghiamo di notare che l'attuale driver VGA / VBIOS permette l'uscita Dual Graphics solo dal display integrato.
Per aggiornamenti futuri, ti preghiamo di consultare il nostro sito per ulteriori informazioni.
Fase 4:
Avvia l'OS.
Quindi rimuovi il driver AMD, se ne hai installato uno qualsiasi nel tuo sistema.
Fase 5:
Installa sul sistema il driver VGA integrato nel CD di supporto, sia per la VGA integrata che per la scheda grafica discreta.
Fase 6:
Riavvia il computer. Clicca con il pulsante destro sul desktop. Clicca su "AMD VISION Engine Control Center" per entrare nel Centro di controllo AMD VISION Engine.
Fase 7:
Puoi inoltre cliccare su "AMD VISION Engine Control Center" sulla barra delle applicazioni di Windows per accedere al Centro di controllo AMD VISION Engine.
Fase 8:
Nel Centro di controllo AMD VISION Engine, scegli "Performance". Clicca su "AMD CrossFireTMTM".
Fase 9:
Clicca su "Enable CrossFireTM" e poi su "Apply" per salvare le modifiche.
Fase 10:
Riavvia il sistema e potrai goderti Dual Graphics.
Q (352):
Non riesco a installare il driver VGA per la scheda grafica integrata della CPU E3-1265L v3 nel CD di supporto. Quale driver VGA devo installare per la CPU E3-1265L v3?(9/1/2013)
Q (342):
Quando voglio aggiornare Lucid Virtu MVP, ci sono due tipi di Lucid Virtu MVP nel sito web ufficiale di Lucid: Virtu MVP e Virtu MVP R2.0. Quale versione di Virtu MVP devo aggiornare?(3/1/2013)
A:Nota che Virtu MVP2.0 è disponibile per il download e l'acquisto solo per i clienti Lucid del negozio online.
Aggiorna la versione della 1° generazione di Virtu MVP. http://www.lucidlogix.com/driverdownloads-mvp.shtml.
Q (335):
La mia porta DVI può traferire i segnali audio come la HDMI? Come posso farla funzionare con il mio monitor HDMI?(2/1/2013)
A:Assicurati che siano soddisfatti i requisiti richiesti di seguito elencati.
1. La porta DVI della scheda madre deve supportare HDCP.
Se non sei sicuro delle specifiche della porta DVI, fai riferimento alle specifiche per la tua scheda madre sul nostro sito web.
2. Collega un adattatore DVI-HDMI.
3. Regola l'opzione funzione DVI su [as HDMI] in BIOS\Advanced\North Bridge Configuration.
4. Imposta HDMI come dispositivo di riproduzione predefinito nel Pannello di controllo\Suoni.
Q (338):
Dopo aver installato l'utility VirtuMVP V2.1.221, non posso usare la stampante. Cosa c'è di sbagliato?(2/1/2013)
Q (332):
Mi appare il BSOD quando si installa un driver per scheda VGA discreta in Windows 7 o Windows 8 in modalità GPT con la serie 7 di Intel o serie FM di AMD, cosa devo fare?(1/1/2013)
A:Rimuovi Virtu MVP dal pannello di controllo, quindi installare il driver della VGA discreta.
Dopo aver installato il driver VGA, puoi reinstallare Virtu MVP.
Q (327):
Come uso il doppio monitor in modalità prestazioni Maximum 3D con la scheda VGA GTX690?(11/1/2012)
A:La GTX690 ha due GPU che lavoreranno insieme in modalità prestazioni Maximum 3D.
Devi collegare i tuoi monitor a DVI_2 e DVI_3 provenienti dalla stessa GPU.
Q (324):
Come posso far girare la larghezza di bus a 128bit tramite VGA incorporata su schede delle serie Z77, Z68, B75, H67?(10/1/2012)
A:La larghezza di bus a 128bit è supportata con tecnologia di memoria a doppio canale.
Se vuoi avere la larghezza di bus a 128bit con VGA incorporata, metti i moduli di memoria a doppio canale nel tuo sistema.
Q (317):
Il mio sistema non può riconoscere la scheda VGA e mostrare d6 in Dr. Debug.(6/1/2012)
A:Dato che ci sono alcune schede VGA con informazioni scorrette nel vBIOS (Video BIOS), ti preghiamo di contattare il fornitore della tua scheda VGA o aggiornare il BIOS all'ultima versione dal nostro sito web: https://www.asrock.com/support/download.asp
Se hai qualsiasi domanda, ti preghiamo di contattare ASRock TSD.
Q (291):
Quando installo ATI HD6670, HD6570 e HD6450 sulle schede madri della serie A75/A55, non c'è uscita video dalla scheda VGA. Cosa posso fare?(9/1/2011)
O, entra in BIOS > Configurazione North Bridge e imposta [Dual Graphics] su [Disabled].
Q (290):
Vorrei aggiornare il driver VGA 3D Vision di NVIDIA dal sito ufficiale, che cosa devo fare?(6/1/2011)
A:Si prega di fare riferimento al link qui sotto per la sezione Download dei driver sul sito Nvidia: http://www.nvidia.com/Download/index.aspx
Selezionare come di seguito,
Tipo di prodotto: GeForce
Serie del prodotto: GeForce 400 Series
Prodotto: Geforce GT420
Si prega di fare riferimento alla foto qui sotto:
Selezionare il sistema operativo e la lingua e sarai in grado di cercare il driver.
Q (287):
If I play Blu-ray 3D movie and use DTS-HD 7.1 formats to output by PowerDVD 10 on Mini PC 3D series, the sound may be lag. How do I solve this problem?(4/1/2011)
A:Please kindly refer to below steps to download the patch 2721 version and install it for try.
Step 1. Click the icon to upgrade PowerDVD.
Step 2. Click the item "Critical update for PowerDVD!" as below.
Step 3. Click "Download free update now".
Step 4. Download the patch v2721 and install it.
Q (284):
Why can't I play Blu-ray discs with Core100HT-BD under Windows XP?(4/1/2011)
A:For Intel graphics platforms (including G41, H55, H67 chipsets…etc), Blu-ray playback is only supported on Windows Vista and Windows 7.
Q (270):
Non è fluido quando sto riproducendo un DVD non 3D o Blu-ray sul mio TV 3D. Come posso risolvere questo problema?(12/30/2010)
A:Controlla gentilmente il tuo distributore TV circa le impostazioni di "Motion Plus" o delle funzioni simili sul tuo TV 3D.
Per esempio:
1. Sulle TV Samsung 3D (UA46C7000WM), c'è "Auto Motion Plus"; imposta questa opzione su "Clear" come nella foto.
2. Sulle TV Sony 3D, c'è anche un'opzione "Motion Flow", impostala su "Clear".
Q (256):
I have plug two NVIDIA® VGA cards on my motherboard but, I cannot find the Enable SLI option in NVIDIA® Control panel?(9/3/2009)
A:Following steps as below may help you to solve this issue.
1. If your motherboard has the SLI/XFire switch card, please put the SLI/XFire Switch card to 8x/8x, if there is no switch card on your motherboard, please skip this step.
2. Remove the graphics card from the PCI-E 1 slot.
3. Restart Windows.
4. Install the driver for the graphics card (again).
5. Put the VGA card back into the PCI-E 1 slot, and put the SLI bridge on.
6. Activate SLI function by NVIDIA® control panel ..
Q (252):
If I use HDMI output, the desktop size can not fully fit the monitor.
How can I do?(8/11/2009)
A:
If your monitor has "PC mode", please try to adjust monitor to PC mode. If not, please contact your monitor vender for help.
Or you can do some setting on driver.
ATI VGA output, please refer setting A.
NVIDIA® VGA output, please refer setting B.
A. If you use ATI VGA output, please enter [ATI driver controller] to adjust [Scaling Option]
1. Right check the mouse, and enter ATI driver controller.
2. Find the [Scaling Option] to setting the bar until to fit the size.
B. If you use NVIDIA® VGA output, please enter [NVIDIA® driver controller] to adjust [Resize desktop]
1. Right check the mouse, and enter NVIDIA® driver controller.
2. Find the [Resize desktop] option to setting the bar until to fit the size.
Q (245):
I install ATI 2xxx, 3xxx, 4xxx series PCIE VGA card on the motherboard. After installing all Windows® XP drivers from the motherboard, it still shows an unknown "audio device on the high definition audio bus." message under device manager. What could I try?(1/12/2009)
A:There is an integrated audio chip in the ATI 2xxx, 3xxx, 4xxxx series graphics cards.
Please install ATI HDMI audio driver.
http://ati.amd.com/support/drivers/xp/hdmiaudio-xp.html
Q (242):
When I connect a HDMI_SPDIF cable from the HDMI VGA card (GTX260 or GF9800) to the onboard HDMI_SPDIF header, it cannot get sound from the HDMI output. What should I do?(11/27/2008)
A:The pin definition of the onboard HDMI_SPDIF header is different from the header of some VGA cards.
Please plug in the HDMI_SPDIF cable reversely like following picture.
Q (205):
I am using the onboard VGA of A780FullDisplayPort or ATi Radeon HD 2xxx/3xxx series PCIE card. Every time I run the 3DMARK or PCMARK, it always freezes during the splash-screen. It does not work at all. How do I fix it?(8/3/2007)
A:This is a compatibility issue of ATi Radeon HD 2xxx/3xxx PCIE card and 3DMARK/ PCMARK program.
Futuremark provides 2 solutions for this issue as follows. Solution 1: Add the command line –nosysteminfo into the target of 3DMARK / PCMARK's shortcut.
Solution 2: Rename the "Direcpll.dll" file to something else. (Found in C:\WINDOWS\system32\Futuremark\MSC\Direcpll.dll)
The link of Futuremark FAQ:
http://service.futuremark.com/support/search.jsp?categoryid=14&search=1
Q (199):
I'm using Windows® Vista™. I just installed a new VGA card, but the screen gets abnormal display. Is there anything I should do?(4/20/2007)
A:After you install a new hardware device (especially VGA card) under Windows® Vista™, we suggest re-rating your system (refer to the following steps). It may be able to solve the problem.
1.Go to Start > Control Panel > System and Maintenance> Performance Information and Tool
2.You will see the above screen. Press "Refresh Now" to re-rate your system.
Q (147):
I use PCI Express VGA card on my ASRock motherboard. My operation system is Windows 98SE / ME. In "Device Manager", there are two "Display Adapter Controllers" in "Display Adapters" option. What should I do?(7/15/2005)
A:Please follow the below steps to install PCIE VGA card driver.
a. Please enter "Device Manager" and you will see "Standard Display Adapter (VGA) and "Standard PCI Graphics Adapter (VGA)" in the "Display Adapters" option.
b. Please Choose "Standard Display Adapter (VGA)" and right-click "Remove".
c. After removing the device, please reboot your system. Then, you will only see "Standard Display Adapter (VGA)" in "Display Adapter" option.
d. Please start to install your PCIE VGA card driver.
Q (110):
My motherboard is SiS chipset based motherboard and the driver of AGP PCI to PCI is version 1.16a or 1.13.03 installed. After updating the Windows XP to service pack 2, there is an exclamation mark in AGP driver of device manager. What should I do?(8/16/2004)
A:If you see an exclamation mark in AGP driver of device manager, please simply reinstall the SiS AGP PCI to PCI driver from ASRock support CD or web site again.
Q (60):
Can I use on-board VGA and add-on AGP card for dual monitors?(9/15/2003)
A:No, if you would like to use dual monitors please install PCI VGA card with on-board VGA or AGP card with PCI VGA card on the motherboard.
Q (57):
My ASRock motherboard provides a 1.5V AGP slot. How do I know if I can use my AGP card on the motherboard?(9/15/2003)
A:Generally, the notch of 1.5V AGP slot is different from 3.3V AGP slot. Please refer to the following picture. If your AGP card has the 1.5V key, it is able to work on a 1.5V AGP slot. But few AGP adapters such as SiS305 based cards do not match the rule.
Please check detail AGP SPEC form http://www.ertyu.org/~steven_nikkel/agpcompatibility.html
If you are not sure what your AGP card is 1.5V or 3.3V, please double check with the card vender.
Q (15):
When I want to install an add-on AGP graphics card, do I need to adjust any settings in the BIOS if my motherboard has Onboard VGA?(1/30/2003)
A:No! You do not need to adjust any settings in the BIOS. ASRock motherboard will switch between add-on AGP and Onboard VGA automatically when you install or uninstall it.